Replacing a tile floor in your bathroom is not really that much different than replacing a tile floor in other rooms of the house. When you are doing this task, it is very important to be very precise in your measurements, because you don’t want to cut any corners when it comes to the dimensions of the floor. You also want to be certain that the area you have chosen for the flooring will be large enough to support the tiles you want to place on it.
Bathroom floors can be installed by Tile and Grout Cleaning Perth with four basic types of tile: porcelain, ceramic, tumbled stone and marble. Most homeowners choose the ceramic tile because it is the most popular type of tile used for bathrooms. They are easy to clean and look good all the time.
The first thing you need to do before installing a new tile in your bathroom is to prepare the floor. It is always best to install a non-slip floor mat first since you don’t want to accidentally slip and fall on the floor. After you have done that, use tape to mark the edges of the tiles so that you won’t end up with cracks after you install them.
Next, apply adhesive onto the edge of the tile you want to replace. Make sure that you cut the holes evenly on all sides of the tile to avoid gaps. As you are installing the new tile, use a broom to sweep off any pieces of soil from under the tiles. A vacuum cleaner can also be used to remove small bits of dirt from the surface of the tiles.
Make sure that all the tiles are laid perfectly straight. If you notice any defects or irregularities in the tiles, you should cover the surface with masking tape. Then you should scrape the surface of the tiles with a scraper.
The cut edges of the floor tiles should be smooth so that they fit perfectly into the hole in the base. Remove any shavings and other loose particles of dirt before putting the new tiles on the floor.
You should test the fit of the tiles by placing them in the holes without the base. Take the tape measure and mark the holes on the wall where the tiles need to be placed. Mark the position of the new floor tiles as well. You will have plenty of time to accomplish this task especially if you are in the work at home success business.
Your next step is to fill the holes in the base with water. Now fill the spaces between the tiles with soap. You can also use other floor cleaning products but make sure that the mixture is wet enough so that it doesn’t get trapped underneath the tiles.
After the tile is dry, you can begin installing the new tiles. Use your hands to push the tiles into place, using plenty of pressure. If you find that the fit of the new tiles is not very good, you can purchase some help.
You should carefully paint the grout lines using a wax mixture to make the previous floor tiles look similar to the new ones. To get rid of the dirt and grime that have built up in the base, you can use a scrub brush to wipe the surface.
Using a mop is recommended to remove excess water from the floor after you have removed the old tile. When the mop is damp, it is easier to get into every nook and cranny. Once you are done cleaning the floor, it is important to apply a high-quality sealant.
Since the installation of a new tile on a bathroom floor can be tricky, it is always better to hire a professional. This will guarantee that the job will be done properly and on time.